Home > News And Knowledge > Extrusion Knowledge > Operation regulation of aluminum extrusion press

Extrusion Knowledge

Operation regulation of aluminum extrusion press

Operation regulation of aluminum extrusion press
 

Aluminum extrusion, aluminum billet melting and casting, the operation is under the high temperature condition, to some extent, we should say, it is a dangerous work. So it is very importance to train the employees', increase employees'' work safety awareness and request employees to comply with all safety requirements.  Now I share the safety procedure from our Chinese client:

Safety Production, Prevention First
1. The hole of loose dummy block should face to the direction of pin of extrusion stem.
2. Through the mirror, check the loose dummy block, extrusion stem and the situation of short hot billet come into the container liner.
3. Check again the loose dummy block whether is placed in the right position on the manipulator, if any problem, Stop the machine!
4. Do remember that turn around to clamp the billet for next cycle need to wait for after the billet and dummy block come into container liner.
5. When the operator starts to run the extrusion press, should be careful to avoid the accident, and strictly operate the machine according to the running program.

Previous   [Return Home] [Print] [Go Back]   Next

Contact Us

: 575645529